Stopper® Station Slim Line SL-2107, SL-2307 & SL-2407 We protect the things that protect you.
PRODUCT DIMENSIONS 2.20 in. (56mm) FRONT VIEW 4.25 in. (108mm) 2.16 in. (55mm) 1.36 in. (35mm) .8 in.
FACEPLATE INSTALLATION STEP 1 PLACE THE TWO LOCATING TABS INTO THE TWO TOP SLOTS OF THE FRONT HOUSING AND ROTATE DOWNWARD AS SHOWN. FRONT HOUSING SNAPS INTO PLACE. FACEPLATE REMOVAL STEP 2 GRASP FRONT COVER WHILE USING A SMALL FLATHEAD SCREWDRIVER. PLACE INTO THE BOTTOM SLOTS, PRESS UPWARD AND ROTATE COVER OFF AS SHOWN.
SWITCH CONFIGURATION WIRING DIAGRAM { { LED POWER FORM C CONTACT RED + BLACK WHITE N.C. GREEN N.O. BLUE COM CONTACT RATING - 30 VDC, 5 AMP CONTACT CONFIGURATION - SPDT MOMENTARY CONTACT N.C. COM N.O.
LAMP REPLACEMENT STEP 1 GRASP SWITCH HOLDER ASSEMBLY AS SHOWN. USING OTHER HAND ROTATE BUTTON 1/4 in. CLOCKWISE AND SEPARATE THE TWO PIECES. PULL LAMP STRAIGHT OUT. STEP 2 INSERT NEW LAMP AND COMPLETE INSTALLATION AS SHOWN ABOVE BUT ROTATE COUNTER-CLOCKWISE TO LOCK THE PIECES TOGETHER. LAMP HOLDER ASSEMBLY 24 VDC LAMP STD.
INSTALLATION PROCEDURE DIRECTLY TO SINGLE GANG OUTLET BOX TYPICAL SINGLE GANG OUTLET BOX (EITHER FLUSH OR SURFACE MOUNT) BACKPLATE RETAINING NUT WASHER FACEPLATE #6-32 x 1 1/2 in.
INSTALLATION PROCEDURE DIRECTLY TO WALL OR DOOR CASING USING A SPADE BIT, DRILL A 1.5 in.(38mm) HOLE, PULL WIRE THROUGH AND COMPLETE INSTALLATION AS SHOWN. STEP 1 STEP 2 ANCHOR (2) PROVIDED FOR MASONARY OR WALLBOARD SURFACE ONLY BACKPLATE RETAINING NUT WASHER FACEPLATE 3-9/32 in. 19039 SCREW #6 X 1-1/2 in. (2) PROVIDED BUTTON ASSEMBLY (SEE PAGE 4) FOR MASONRY OR WALLBOARD MOUNTING DRILL (2) 3/16 in. DIA.
WARRANTY Three year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components). Electronic warranty form at www.sti-usa.com/wc14. 2306 Airport Rd • Waterford, MI 48327 Phone: 248-673-9898 • Fax: 248-673-1246 info@sti-usa.com • www.sti-usa.com Safety Technology International (Europe) Ltd.
