Stopper® Station Series SS-2008 Push Button Pneumatic Timer Button ADA for operation Pneumatic Timer Models SS-2008 Red ALL MODELS COME WITH A SS-2108 Green COLOR MATCHED SURFACE SS-2208 Yellow MOUNT BACKBOX SS-2308 White SS-2408 Blue We protect the things that protect you.
This push button has been tested according to UL38 and UL2017. Manual fire alarm stations are listed in UL category UNIU and non-fire alarm initiating devices are listed in UL category UEHX. It is important to read, understand and follow all instructions provided with this product. It is the installer’s responsibility to comply with NFPA72 and 101, NEC, mounting specifications according to ADA and other applicable fire and electrical codes.
Installation and Service Instructions STOPPER® STATION SERIES SS-2008 PUSH BUTTON PNEUMATIC TIMER SAFETY NOTICE TO INSTALLERS AND USERS I. GENERAL Product Dimensions Contact Rating See page 3 One set NO and one set NC Rated at 10 AMP @ 240 VAC Recognized component listing is 1,000,000 cycles UL File #UL57255 Operating Temperature of button 15°-120°F (-9°to +49°C II. CONTENTS LIST QTY. 1 1 1 4 2 1 4 4 1 DESCRIPTION Push Button Housing Assembly 19001 Allen Head Screw #8-32 x 3/8 in.
PRODUCT DIMENSIONS 1.62 in. (41mm) 3.25 in. (82mm) PUSH 1.58 in. (40mm) 4.87 in. (124mm) 1.375 in.
BACKBOX PREPARATION (NOT INCLUDED WITH FLUSH MOUNT COVERS) DRILL POINT LLOCATIONS OCATIONS PROVIDED PROVIDED TOP AND BOTTOM BOTTOM FOR FOR 1/2 in. TOP CONDUIT FIT TINGS. CONDUIT FITTINGS. AS NEEDED DRILL AS FIELD DRILLING FOR CONDUIT ENTRY IS REQUIRED. LOCATIONS SHOWN ALSO APPLY TO OPPOSITE, PARALLEL SIDES.
CONTACT DIAGRAM INSTALLATION NOTE: NC (GREEN) (BLACK) NC NO (WHITE) (RED) NO LEAD WIRE COLORS IN PARENTHESIS. ADA mounting compliance requires the operable part of the initiating device shall not be less than 1.1m (3 1/2 ft.) or greater than 1.37m (4 1/2 ft.) above finished floor service. CONTACTS One set NO and one set NC NC NC NO NO COUNTERCLOCKWISE SWITCH INFORMATION TIMER RANGE ADJUSTMENT SCREW ADJUSTMENT RANGE - 2 TO 60 SECONDS TIMER FACTORY SET TO MINIMUM TIME SETTING.
INSTALLATION 19018 ANCHOR PROVIDED (4) PR OVIDED 71100A-COLOR SURFACE 71100A -COLOR SURF ACE BOX BOX DRILL (4) 3/16 in. DIA HOLES WITH PROVIDED SURFACE BACKBOX 19039 SCREW #6 x 1-1/4 1-1/4 in. PROVIDED (4) PR OVIDED 19060 SCREW #6 #6-32 -32 x 1 in.
Warranty Three year guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components). Electronic warranty form at www.sti-usa.com/wc14. 2306 Airport Rd • Waterford, MI 48327 Phone: 248-673-9898 • Fax: 248-673-1246 800-888-4STI (4784) • www.sti-usa.com Safety Technology International (Europe) Ltd.
