Owner manual

INSTALLATION OF SUB-121 ENVIRO-KIT
All specifications and information shown were current as of publication and are subject to change without notice.
SUB-121ISDEC 2013
Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: [phone] • Fax: [phone]
Toll Free: 800-888-4784 • E-mail: [e-mail]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
E-mail: [e-mail] • Web: www.sti-europe.com
Electronic warranty form at www.sti-usa.com/wc14
STI-1210D/1221D
IMPORTANT
In applications where wash downs or rainfall
occur, it is recommended a drain or weep
hole be provided at location shown.
STI-1210E/1221E
62961 GASKET (1) PROVIDED
NOTE: AS AN ASSEMBLY AID
WATER MAY BE USED AS
A LUBRICANT
6297316 GASKET
(1) PROVIDED
RETAINING CLAMP
(PRE-EXISTING)
SOCKET HEAD SCREW
(PRE-EXISTING)
COVER
629761 "O" RING
GASKET
SLOT #2
SLOT #1
APPROX.
CENTER LINE
OF UNDERSIDE OF
COVER
WHEN USING 629761
GASKET EXISTING RETAINING
CLIP MUST BE INSTALLED
IN SLOT #1 AS SHOWN.
DRILL A 1/4 in. (6mm) DIA.
WEEP HOLE AS SHOWN
1 in. (25mm)
629761 "O"
RING GASKET
6297316 ADHESIVE
BACKED GASKET
(4) 19033 ANCHORS
(4) 19013 SCREWS 10 X 1 1/2
E SPACER
(PRE-EXISTING)
ADHESIVE BACKED GASKET
(1) PROVIDED
"O" RING GASKET
(1) PROVIDED
D SPACER
STI-1221D
STI-1210D
"O" RING GASKET
(1) PROVIDED
INSERT
EXISTING
CONDUIT GASKET
(1) PROVIDED
D SPACER
(PRE-EXISTING)
ADHESIVE
BACKED GASKET
(1) PROVIDED
REMOVE BACKING
PAPER PRIOR TO
INSTALLATION
EXISTING
ANCHOR
EXISTING
SCREW
62961 GASKET (1) PROVIDED
NOTE: AS AN ASSEMBLY AID
WATER MAY BE USED AS
A LUBRICANT
6297316 GASKET
(1) PROVIDED
RETAINING CLAMP
(PRE-EXISTING)
SOCKET HEAD SCREW
(PRE-EXISTING)
COVER
629761 "O" RING
GASKET
SLOT #2
SLOT #1
APPROX.
CENTER LINE
OF UNDERSIDE OF
COVER
WHEN USING 629761
GASKET EXISTING RETAINING
CLIP MUST BE INSTALLED
IN SLOT #1 AS SHOWN.
DRILL A 1/4 in. (6mm) DIA.
WEEP HOLE AS SHOWN
1 in. (25mm)
629761 "O"
RING GASKET
6297316 ADHESIVE
BACKED GASKET
(4) 19033 ANCHORS
(4) 19013 SCREWS 10 X 1 1/2
E SPACER
(PRE-EXISTING)
ADHESIVE BACKED GASKET
(1) PROVIDED
"O" RING GASKET
(1) PROVIDED
D SPACER
STI-1221D
STI-1210D
"O" RING GASKET
(1) PROVIDED
INSERT
EXISTING
CONDUIT GASKET
(1) PROVIDED
D SPACER
(PRE-EXISTING)
ADHESIVE
BACKED GASKET
(1) PROVIDED
REMOVE BACKING
PAPER PRIOR TO
INSTALLATION
EXISTING
ANCHOR
EXISTING
SCREW
62961 GASKET (1) PROVIDED
NOTE: AS AN ASSEMBLY AID
WATER MAY BE USED AS
A LUBRICANT
6297316 GASKET
(1) PROVIDED
RETAINING CLAMP
(PRE-EXISTING)
SOCKET HEAD SCREW
(PRE-EXISTING)
COVER
629761 "O" RING
GASKET
SLOT #2
SLOT #1
APPROX.
CENTER LINE
OF UNDERSIDE OF
COVER
WHEN USING 629761
GASKET EXISTING RETAINING
CLIP MUST BE INSTALLED
IN SLOT #1 AS SHOWN.
DRILL A 1/4 in. (6mm) DIA.
WEEP HOLE AS SHOWN
1 in. (25mm)
629761 "O"
RING GASKET
6297316 ADHESIVE
BACKED GASKET
(4) 19033 ANCHORS
(4) 19013 SCREWS 10 X 1 1/2
E SPACER
(PRE-EXISTING)
ADHESIVE BACKED GASKET
(1) PROVIDED
"O" RING GASKET
(1) PROVIDED
D SPACER
STI-1221D
STI-1210D
"O" RING GASKET
(1) PROVIDED
INSERT
EXISTING
CONDUIT GASKET
(1) PROVIDED
D SPACER
(PRE-EXISTING)
ADHESIVE
BACKED GASKET
(1) PROVIDED
REMOVE BACKING
PAPER PRIOR TO
INSTALLATION
EXISTING
ANCHOR
EXISTING
SCREW