Use and Care Manual

Start by measuring the surface you want to cover and then completely clean for
optimum adhesive conditions. Then cut the sheets as needed with well-sharpened
scissors, peel, and apply to the wall. It’s that easy!
HOW DO I INSTALL STICKTILES® AROUND OUTLETS?
StickTILES® are easy to custom fit. Simply measure the area on the wall where the
outlet or switch plate is. Transfer those measurements onto the StickTILES® sheet
and cut!
I AM INSTALLING STICKTILES® FOR THE FIRST TIME. WHAT
INSTALLATION TIPS CAN YOU PROVIDE ME?
Follow these handy installation tips when working with StickTILES®:
 When installing peel and stick backsplashes to the wall, always start at the
bottom corner of the wall and work your way up and out.
 Fold back 1/3 of the protective paper backing, apply to wall and continue to
peel back as you place the tile on the wall. This will help with alignment.
 Make sure to overlap the grout line of each tile. This will ensure the grout line
remains even.
 Keep a credit card or plastic smoother handy and press across each applied
sheet after it is firmly on the wall to ensure the best possible adhesion.
 Do not remove the sheet’s top layer of protective film until it is firmly placed on
the wall and you are certain of placement.
MY STICKTILE® APPEARS TO BE LOOSE ON THE WALL. WHAT
SHOULD I DO?
StickTILES® are engineered to adhere to many surfaces; however, different
surface treatments may impact the adhesive properties of the product. If you
notice curling or loosening, simply use a strong bond adhesive spray on your tiles
(or directly onto the surface). Even with this extra step, StickTILES® are still
easier, and more affordable, to install than ANY other genuine or man-made tile.
REMOVAL