Use and Care Manual

ManualsBrandsStickTiles ManualsDecorative Paneling10.5 in. x 10.5 in. Chevron Distressed Wood Peel and Stick Tiles (4-Pack)

USE, CARE AND APPLICATION

FREQUENTLY ASKED QUESTIONS

WHAT ARE STICKTILES®?

StickTILES® is a brand new product designed and created by RoomMates giving

you the look of real tile for a fraction of the cost. Transform a bathroom wall or

kitchen backsplash, for example, into an attractive and protective new surface.

StickTILES® will instantly change the look of your room! The adhesive backing on

each decorative sheet allows for quick and easy installation-simply peel and stick.

HOW MANY STICKTILES® COME IN A PACK?

Four (4) StickTILES® sheets come in every package. Each tile is 10.5 inches X

10.5 inches. Depending on the layout of the tile design – a package will cover

approximately between 2.25 to 3 square feet.

WHAT TEMPERATURES ARE BEST SUITED FOR

STICKTILES®?

We recommend installing StickTILES® at an ambient (normal and comfortable)

room temperature, neither too cold nor too hot. StickTILES® are NOT

recommended for commercial or outdoor applications, as extreme weather

conditions are likely to compromise the adhesive properties of the product.

CAN STICKTILES® BE PLACED AROUND HEAT?

Summary of content (5 pages)

PAGE 1
USE, CARE AND APPLICATION FREQUENTLY ASKED QUESTIONS WHAT ARE STICKTILES®? StickTILES® is a brand new product designed and created by RoomMates giving you the look of real tile for a fraction of the cost. Transform a bathroom wall or kitchen backsplash, for example, into an attractive and protective new surface. StickTILES® will instantly change the look of your room! The adhesive backing on each decorative sheet allows for quick and easy installation-simply peel and stick.
PAGE 2
Once installed, StickTILES® are resistant to heat and humidity. However, it is imperative that there is not direct contact with open flames and StickTILES®. If your installation involves the areas behind a gas range that doesn’t have a rear protective panel, allow for a distance of at least 15 inches away from any open flames.
PAGE 3
DO I REALLY NEED TO CLEAN MY WALL BEFORE APPLYING STICKTILES®? Always apply StickTILES® to dry and clean surfaces. Make sure the surface is free of dust or grease as the adhesive will stick to any residue, which may result in loosening of the tile. We recommend wiping down the wall with an all-purpose wall cleaner before installation. This will ensure StickTILES® will best adhere to the wall. Make sure the wall is completely dry before applying StickTILES®.
PAGE 4
Start by measuring the surface you want to cover and then completely clean for optimum adhesive conditions. Then cut the sheets as needed with well-sharpened scissors, peel, and apply to the wall. It’s that easy! HOW DO I INSTALL STICKTILES® AROUND OUTLETS? StickTILES® are easy to custom fit. Simply measure the area on the wall where the outlet or switch plate is. Transfer those measurements onto the StickTILES® sheet and cut! I AM INSTALLING STICKTILES® FOR THE FIRST TIME.
PAGE 5
CAN I EASILY REMOVE MY STICKTILES® FROM THE WALL? Please note, StickTILES® are an adhesive tile and can be removed if needed, but removal may cause damage to the wall. Follow these steps to remove. Begin at the corner of each tile sheet and carefully peel off the wall. Use a hair dr yer on low heat as you are peeling back the tile to assist with removal. Direct the heat of the hair dryer to the corners, so the heat reaches under the tile enabling the warm air to directly target the adhesive.