Installation Instructions

ARCS Blue
Upgradable readers
Installation instructions
ARCS Blue
Lecteurs évolutifs
Notice d’installation
ARCS Blue
Lectores escalables
Procedimiento de instalación
conforme con NOM-024 -SCFI-2013
© STid - 20 PA des Pradeaux FR13850 Gréasque - NI1114C12- Page 5 sur 18 - Ed. 10/05/2022
STid reserves the right to make change without notice, for the purpose of product improvement.
Procedure to add the biometric (SE6) or 125 kHz module (SE8 / SE8M) or QR Code module (SE9)
SE8 / SE8M
SE8 compatible with: HID Prox / EM4x02 / EM4x50 / Nedap.
SE8M compatible with: HID Prox / EM4x02 / EM4x50 / AWID / ioProx / Indala.
SE9
US
FR
ES
Minimum reading distance depending on the size of the QR Code
QR Code
Distance
mm
inch
mm
inch
10x10
0.39x0.39
26
1.02
15x15
0.59x0.59
36
1.42
20x20
0.79x0.79
44
1.73
25x25
0.98x0.98
59
2.32
30x30
1.18x1.18
77
3.03
Code format read:
- QR Code
- Aztec
- Data Matrix
- Code 128
- Code 39
(2)
To pass the module cable into
the support, cut out the
preformed part of the support.
- Check that the cable length that comes out of the module does not exceed 0.39 in. If it
does, push the excess cable into the module housing.
- Connect the cable of the module to connector J9. You should not have a loop
(1)
.
- Insert the module into the reader slot (until you hear a “click” for SE6)
- Cut the base as shown in the drawing
(2)
.
- Place the “reader + module” on the base (i.e. Mounting), use the 2 screws provided with
the module
(3)
.
- Read only readers: Activate the module with configuration card (SCB or OCB).
Screw
Option: Reinforcement plate to rigidify the assembly:
Standard/keyboard reader + module SE6v2: Ref. SE7-ARC-DE-02.
Touch screen reader + module SE6v2: Ref. SE7-ARC-F-02.
Standard/keyboard reader + module SE9: Ref. TOLE-ARC-AQ-BQ-01.
Touch screen reader + module SE9: Ref. TOLE-ARC-CQ-01.
Slot for the
passage of
the module
cable
(3)
(3)
(1)
STid guarantees the good working order, compliance, technical support and after-sales service of the readers and modules (SE6, SE8, SE8M and SE9) that are
installed as explained below, without any internal or external modifications.