Installation Manual

OPERATION
Register your product
ENGLISH
www.stiebel-eltron-usa.com PSH Plus | 5
2.3 Test symbols
See the type plate on the appliance for testing information and
certification details.
3. Register your product
You must register this product within 90 days of pur-
chase on our web site in order to activate the standard
warranty or to be eligible for the extended warranty.
Go to our web site at www.stiebel-eltron-usa.com
and click on “Register Your Product”.
Before beginning the registration process, we suggest that
you gather the necessary information which will be as
follows:
Type, Example: PSH 30 Plus (from label that is on the unit)
Number listed after “Nr.”
Place of Purchase
Purchase Date
First & Last Name
Email address
Physical Address
Phone Number
Installation Date
IF YOU HAVE ANY QUESTIONS CONCERNING THE REGISTRA-
TION PROCESS OR WARRANTY OPTIONS, PLEASE CONTACT
STIEBEL ELTRON USA DIRECTLY AT 800.582.8423.
4. Appliance description
The appliance heats DHW using an electric resistance element.
You can adjust the temperature using the temperature knob. The
water is heated automatically to the required temperature.
The internal steel cylinder is coated with special "Co Pro" enamel
and is equipped with a sacrificial anode. The anode protects the
interior of the tank from corrosion. When the sacrificial anode
becomes worn, it will need to be replaced.
Frost protection
The appliance is also protected against freezing by the temperature
setting "*", provided that the appliance is supplied with power.
The appliance switches on when necessary and heats the water to
avoid freezing. The frost protection measure does not protect the
water supply lines and the T&P relief valve from freezing.
1
2
1 Hot water outlet stub
2 Cold water inlet stub
5. Settings
The temperature can be freely adjusted. It is factory set to 125 °F
(52 °C).
Turn the knob clockwise to increase the temperature setting, and
counter-clockwise to decrease it.
max
D0000037146
2
1
3
4
5
1 ON/OFF indicator
2 Temperature knob
3 Frost protection
4 Recommended energy saving position, low scaling, 140 °F
(60 °C)
5 Maximum temperature setting, 167 °F (75 °C)