Installation Sheet

OPERATION
Register your product
4 | CK 150-1 / 200-2 Trend www.stiebel-eltron-usa.com
2.5 Licenses/certifi cates
- UL (U.S.A) Std. 2021
- CSA (Canada) Std. 22.2 No. 46
3. Register your product
You must register this product within 90 days of
purchase on our web site in order to activate the
standard warranty or to be eligible for any extended
warranty. Go to our web site at
www.stiebel-eltron-usa.com and click on register
your product.
Before beginning the registration process, we suggest that
you gather the necessary information which will be as
follows:
Model (Example: CK 200-2 Trend):
Serial number (listed after “Nr.”):
Place of Purchase:
Purchase Date:
First & Last Name:
Email address:
Physical Address:
Phone Number:
If you have any questions concerning the registration process
or warranty options, please contact Stiebel Eltron USA direct-
ly at (800)-582-8423.
4. Appliance description
The appliance is a wall mounted electric direct heater. It is suit-
able for use in areas such as workspaces, kitchens, bathrooms
and alike.
The appliance heats the indoor air and keeps it at the selected
temperature. The appliance includes a fan that draws in indoor
air through an air intake at the back of the appliance. Inside the
appliance, the intake air is routed over a PTC heating element.
Heated air is expelled through the air discharge at the front of
the appliance. When the selected room temperature has been
reached, the appliance maintains it through repeated heating.
The appliance is equipped with a high limit safety cut-out that
switches the appliance off in case it overheats. Once the cause of
the fault has been eliminated, the appliance restarts within a few
minutes (cooling period).
The appliance is equipped with further overheating protection in
the form of a fuse that shuts down the appliance irreversibly in
the event of severe overheating.
D0000056451
1
2
3
1 Temperature selector
2 Air discharge
3 On/off rocker switch
5. Settings
On the left side of the unit, there is an on/off rocker switch that
controls the operation. In the on position, the unit may turn on
if the thermostat calls for heat. In the off position, the unit does
not function.
The required room temperature can be infi nitely adjusted by
means of the temperature selector.
To shut down the appliance, disconnect the circuit breaker for
the appliance.
Frost protection
To use the appliance only to protect from frost, turn the tempera-
ture selector counterclockwise as far as it will go. In this position,
the appliance heats automatically if the room temperature falls
below the frost protection temperature (See 14.3, “Data table”,
pg. 9).
6. Cleaning, care and maintenance
DANGER: Electrocution
Before cleaning, make sure the power has been turned
off at the circuit breaker panel and that the heating
element of the heater is cool.
Clean the exterior of the appliance when cold with ordinary clean-
ing products. Avoid abrasive or corrosive cleaning products.
If a pale brownish discoloration appears on the appliance casing,
wipe this off as soon as possible with a damp cloth.
!
MATERIAL LOSSES:
Never spray cleaning spray into the air slot.