Brochure

Certified to ANSI/UL Std. 2021
Conforms to CAN/CSA Std. 22.2 No. 46
Technical Data
Model CNS 50-2 E CNS 75-2 E CNS 100-2 E CNS 150-2 E CNS 200-2 E CNS 240-2 E CNS 100-1 E CNS 150-1 E
Item number 231542 232068 231543 231544 231545 231546 233586 233587
Voltage 240
V or 208 V 240 V or 208 V 240 V or 208 V 240 V or 208 V 240 V or 208 V 240 V or 208 V 120 V 120 V
Wattage 500 W 375 W 750 W 563 W 1000 W 750 W 1500 W 1125 W 2000 W 1500 W 2400 W 1800 W 1000 W 1500 W
Amperage 2.1 A 1.8 A 3.1 A 2.7 A 4.2 A 3.6 A 6.3 A 5.4 A 8.3 A 7.2 A 10.0 A 8.7 A 8.3 A 12.5 A
Btu/hr 1706 1280 2559 1921 3412 2559 5118 3839 6824 5118 8189 6142 3412 5118
Required circuit breaker size
1
15 A 15 A 15 A 15 A 15 A 15 A 15 A 15 A
Required wire size (copper) 14 AWG 14 AWG 14 AWG 14 AWG 14 AWG 14 AWG 14 AWG 14 AWG
Temperature range 45 °F – 86 °F / 7 °C – 30 °C
Frost protection setting 45 °F / 7 °C
Height 17 ¾
/ 45.0 cm
Width 14
9
/16
/ 37.0
cm 17 ½
/ 44.5 cm 17 ½
/ 44.5 cm 23 ¼
/ 59.0 cm 29
1
/8
/ 74.0
cm 35
1
/16
/ 89.0
cm 17 ½
/ 44.5 cm 23 ¼
/ 59.0 cm
Depth 3
15
/16
/ 10.0
cm
Weight 8.4 lb / 3.8 kg 9.7 lb / 4.4 kg 9.7 lb / 4.4 kg 12.6 lb / 5.7 kg 15.0 lb / 6.8 kg 17.9 lb / 8.1 kg 9.7 lb / 4.4 kg 12.6 lb / 5.7 kg
Equivalent Baseboard
2
2 3 4 6 8 9.6 4 6
1
This is our recommendation as the manufacturer. Check local codes for compliance if necessary.
2
For comparison purposes only. Exact equivalent will depend on your climate.
Attractive slimline european design
Thermostat built into unit
Baseboard heater alternative
Draft-free, silent operation
CNS Series | Silent Convection Heaters
The CNS-E is a modern surface-mounted convection heater with
a sleek European slimline design. CNS-E units are an effective,
efficient replacement for traditional baseboard heaters, using
significantly less room to accomplish the same heating task.
CNS-E heaters work through natural convection, ensuring
draft-free operation. Cool room air flows in the bottom of the
unit, is warmed by the heating element, and rises silently out
the top to heat the room. The CNS-E is designed with a frost
protection setting. The lowest thermostat setting will maintain
an appropriately-sized room above freezing temperatures.
With its built-in thermostat, a single CNS-E is perfect as a stand-
alone heating system in bathrooms or small rooms. Multiple
CNS-E units can be placed strategically in larger spaces and their
temperature settings adjusted individually for maximum comfort
control. If used to replace an existing heater with a separate
wall-mounted thermostat control, CNS-E heaters may be wired
to use that control. Overheat protection is built into the unit.
CNS Series
Complete
warranty
online.
W
A
R
R
A
N
T
Y
3
L
I
M
I
T
E
D