Installation Sheet

ENGLISH
WWW.STIEBEL-ELTRON-USA.COM GALAXY
™
AUTOMATIC HAND DRYERS | 13
SPECIFICATION
11.2 Technical data
Galaxy™ 1 Galaxy™ M1
Part number 073009 073724
Electrical data
Phase 60/50 Hz - single
V oltage 120 V
Wattage 1850 W 1850 W
Amperage 15.42 A 15.42 A
Required circuit breaker
1
20 A
Required wire size
2
12 AWG
Other
Height 9
13
/16

/ 25.0 cm 10 ½

/ 26.6 cm
Width 6
7
/8

/ 17.5 cm
Depth 9
1
/16

/ 23.0 cm
Weight 5.5 lb / 2.5 kg 8.8 lb / 4.0 kg
Color Alpine white Alpine white, charcoal gray, silver
Housing ABS polycarbonate Cast aluminum
Sound level 53 dB(A) 53 dB(A)
Air volume 90.0 cfm
Drying time 30 seconds
Galaxy™ 2 Galaxy™ M2
Part number 073010 073725
Electrical data
Phase 60/50 Hz - single
V oltage 240 V 208 V 240 V 208 V
Wattage 2000 W 1500 W 2000 W 1500 W
Amperage 8.34 A 7.21 A 8.34 A 7.21 A
Required circuit breaker
1
15 A 15 A
Required wire size
2
12 AWG
Other
Height 9
13
/16

/ 25.0 cm 10 ½

/ 26.6 cm
Width 6
7
/8

/ 17.5 cm
Depth 9
1
/16

/ 23.0 cm
Weight 5.5 lb / 2.5 kg 8.8 lb / 4.0 kg
Color Alpine white Alpine white, charcoal gray, silver
Housing ABS polycarbonate Cast aluminum
Sound level 53 dB(A) 53 dB(A)
Air volume 95.0 cfm
Drying time 30 seconds
1
This is our recommendation for overcurrent protection sized at 100% of load. Check local codes for
compliance if necessary.
2
Copper must be used. Conductors should be sized to maintain a voltage drop of less than 3% under
load