Installation Sheet

6 | GALAXY

™

AUTOMATIC HAND DRYERS WWW.STIEBEL-ELTRON-USA.COM

3. Register your product

You must register this product within 90 days of purchase on our

website in order to activate the standard warranty or to be eligible for

the extended warranty. Go to our web site at

www.stiebel-eltron-usa.com and click on register your product.

Before beginning the registration process, we suggest that you gather the

necessary information which will be as follows:

Type, Example: Galaxy 1 (from the white label that is on the side of the unit)

Number listed after “Nr.”

Place of Purchase

Purchase Date

First & Last Name

Email address

Physical Address

Phone Number

IF YOU HAVE ANY QUESTIONS CONCERNING THE REGISTRATION PROCESS OR

WARRANTY OPTIONS, PLEASE CONTACT STIEBEL ELTRON USA DIRECTLY AT

(800)-582-8423.

4. Appliance description

In order to dry your hands most efﬁ ciently, please use the following procedure:

 Shake off excess water over the wash basin

 Place hands underneath the unit at a distance of 4˝ - 7˝

 Rub your hands together as if you were washing them

Your hands will be dry within 25 - 35 seconds.

The Stiebel Eltron Galaxy™ series hand dryers are equipped with an infrared

sensor switch. This sensor will activate the unit when hands are placed underneath

it. Approximately 7 seconds after the hands have been removed, the unit will

automatically shut off.

The sensor is the black rectangle located underneath the unit between the air exit

and air inlet grills. The sensor switch will not work properly if it has been covered by

gum or dirt. If the sensor is obstructed, the hand dryer will switch off automatically

to prevent it from running continuously. Should the unit overheat, a safety high-

limit switch will turn off the heating element. The safety high-limit switch resets

automatically once the heating element cools down.