Owner Manual

READ AND FOLLOW ALL ASSEMBLY, OPERATING,
AND SAFETY INSTRUCTIONS CAREFULLY. AT LEAST
TWO (2) ADULTS ARE NEEDED TO PUT THIS TABLE
TOGETHER!
3. Attach four Strut Tubes (#4) to Caster Beam Assembly
with four Carriage Bolts (#10) and four Locknuts (#14)
as shown in FIGURE 3. Tighten nuts snug but DO NOT
Parts Needed:
4 pcs - #4 Strut Tube
Hardware Needed:
4 pcs - #10 Carriage Bolt
4 pcs - #14 Locknut
5
Figure 3
10
4
14
NOTE:
Snug, but DO NOT over-tighten these four pivot points.
over tighten.