S T I G A PA R K 1 21 M 8211-3011-07
5b. D 5c. Pro18 - Pro20 1. Park -1993 5a. 2. Park -1993 6a. Park -1999 F G H 3. Park -1993 7. I I 4. Park -1993 2 8. 6b.
J 9. 13. 10. 14. Z X V Y W 11. 15. Denna produkt, eller delar därav, omfattas av följande mönsterskydd: This product, or part of it, is covered by the following design registration: Sverige/Sweden Tyskland/Germany 62 435 M97 07 997.9 (pending) 12.
GB ENGLISH SYMBOLS The following symbols are displayed on the machine in order to remind you about the safety precautions and attention necessary when using the machine. The symbols mean: Warning! Read the instruction book and safety manual before using the machine. Warning! Do not put hands or feet under the cover of the machine when it is running. Warning! Beware of objects being flung out. Keep spectators away. Warning! Before starting any repair work, remove the spark plug cable from the spark plug.
GB ENGLISH height positions - art. no. 13-2921 has stepless adjustment of the mowing height. N.B. The stated mowing heights apply when the machine is standing on firm ground. MOWING HINTS For the best "Multiclip" effect follow this advice: - mow regularly. - use full throttle on the engine. - keep the underside of the mower deck clean. - use sharp blades. - do not mow wet grass. - mow twice (using different mowing heights) if the grass is long.
ENGLISH GB Always use original spare parts. Using non-original spare parts can result in the risk of damage even if they fit in the machine. The cutting system consists of three blade bars, each with two interchangeable blade tips Y (fig 15). Both blade tips should be replaced at the same time to avoid any imbalance. Fit the new blade tips. Tighten the screws V and W fully. Tightening torque: V - 9.8 Nm, W - 24 Nm. And heavy impact can result in the blade tip being folded aside.
