Operation Manual
4
hands or feet near or under the opening of the cutting
OPERATING INSTRUCTIONS
-
-
1. COMPLETE ASSEMBLY
NOTE The machine can be supplied with some parts al-
WARNING! Unpacking and completing the assem-
bly should be done on a flat and stable surface, with
enough space for moving the machine and its packag-
ing, always making use of suitable equipment.
Disposal of the packaging should be done in accord-
ance with the local regulations in force.
-
1.1
• Electric push-button ignition models
Manual.
2. CONTROLS DESCRIPTION
NOTE -
plained in the previous pages.
2.1
Lever positions are indicated on the relevant plate.
a throttle.
2.2
2.3
-
released.
-
gaged.
2.4 Cutting height adjustment
DO THIS WHEN THE CUTTING MEANS IS STATIONARY.
3. GRASS CUTTING
NOTE This machine can be used to mow lawns in a num-
-
chine based on how the lawn is to be mowed.
3.1a
– Lift the rear discharge guard (1) and fasten the grass
3.1b
-
3.1c
mulching (where applicable)
-
3.1d
grass (where applicable)
-
– Close the side discharge guard (4) so that the side dis-
3.2 Engine ignition
• Manual ignition models
• Electric push-button ignition models
-
-
nition button (5) and hold until the engine is running.
3.3 Mowing the lawn
-