8217-3033-01 D Silencium DEUTSCH
S 1. 2.
SVENSKA S 3. 4.
GB ENGLISH GENERAL Your garden shredder is a high-quality, efficient machine. Please read the following instructions carefully to ensure a long life of your garden shredder. Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here. PROPER USE The garden shredders are suitable for private use in gardens and allotments.
GB ENGLISH CHANGING THE DIRECTION OF ROTATION Always switch the device off, wait until it comes to a standstill and shift the safety catch before changing the direction of rotation. left position: cutting rollers run backwards and release blocked shredding material right position: cutting rollers draw in and cut shredding material safety catch Switch on: Turn On-Off switch to “I”. Switch off: Turn On-Off switch to “0”.
GB ENGLISH Generally garden shredders require little maintenance. To maintain their efficiency and a long life, observe the following: - keep vent slits clean and free from obstructions. - check the locking screws (tighten where necessary). - clean the device after shredding. - the shredder should not be cleaned with high pressure cleaners or running water. - treat the cutting roller after every use with a biodegradable spray oil as protection against corrosion.
GB ENGLISH OPERATIONAL FAULTS Problem Possible cause Remedy Motor does not start. - No power supply. - Check fuses. - Mains cable defective. - Have these checked (electrician). - Machine overloaded. - Overload protection triggered Turn OnOff switch to “0” and let machine cool down. - Cutting roller blocked. - Turn On-Off switch to left, then switch machine off and remove shredding material.
