Operation Manual
WARNING!
This special type of chain-saw was designed for maintaining trees and must therefore be used
only by a trained operator using a work tool that is safe and carefully designed. This chain-saw
must be used only for maintaining trees in compliance with the above conditions. It is generally
used with two hands in the same way as a conventional chain-saw.
Some national regulations can restrict use of the machine.
EN
INTRODUCTION 1
Dear Customer,
thank you for choosing one of our products. We hope that you will be completely satised with this
machine and that it fully meets your expectations. This manual has been compiled in order to provide
you with all the information you need to get acquainted with the machine and use it safely and e ciently.
Don’t forget that it is an integral part of the machine, so keep it handy so that it can be con sult ed when
necessary, and pass it on to a further user if you resell or loan the machine.
Your new machine has been designed and manufactured in pursuance with current regulations, and
is safe and reliable if used in compliance with the instructions provided in this manual (proper use).
Using the machine in any other way, or non-compliance with the safety specications relative to use,
maintenance and repair is considered “improper use” which will invalidate the warranty, relieve the
manufacturer from all liabilities, and the user will consequently be liable for all and any damage or injury
to himself or others.
Since improvements are periodically made to our products, you may nd slight dierences between
your machine and the descriptions contained in this manual. Certain modications can be made to the
machine without prior warning and without the obligation to update the manual, although the essential
safety and function characteristics will remain unaltered. In case of any doubts, please contact your
dealer. And now enjoy your work!
CONTENTS
1. Identication of the main components .......................................... 2
2. Symbols ........................................................................................ 3
3. Safety requirements ...................................................................... 4
4. Machine assembly ........................................................................ 9
5. Preparing to work ........................................................................ 10
6. How to start - Use - Stop the engine ........................................... 12
7. Using the machine ...................................................................... 13
8. Maintenance and storage ........................................................... 15
9. Identication of faults .................................................................. 19
10. Accessories ................................................................................ 19