Owner Manual
12
DETAIL B
12
ROLLER
ROLLER TRACK
THE FOLLOWING STEPS REQUIRE TWO CAPABLE ADULTS.
ROLLER TRACK
OPENING
ROLLER
12
11”
2
PRE-ATTACHED ROLLERS
UNDER THE TABLE TOP
2
DETAIL A
Offset the table tops 11”
from the center of the table
and align the edges with
the bottom board, then lay
the table top on the table.
Make sure the rollers drop
into the opening in the
track as shown in Detail A.
9. With at least two capable adults lift the table top #2 and
position it about 11 inches from the center of the table,
then lower the top making sure Rollers #12 drop into the
opening in the Tracks. See Detail A.
10. Once all rollers are in the tracks, slide the table top toward
the middle of the table until it stops as shown in Detail B.
Repeat steps 9-10 for the second table top.
Notched ends of the table
tops must face each other
in the middle of the table.










