Owner Manual

DETAIL A
7
HARDWARE NEEDED (ACTUAL SIZE)
ASSEMBLY TIP
The following pages will have a picture of the
Hardware Needed along with the Quantity, Part
Number and Description. You can lay the
hardware on the picture to identify the hardware.
(QTY. 12)
8
5/16-18 X 1/2” BUTTON
HEAD CAP SCREW
1B-4165M00
TOOLS NEEDED
3/16”
8
5L
5R
2. Insert legs into the table frame, match the
holes in the leg bracket with the holes in the
Frame as shown in Detail A.
Use the cardboard box and packaging
materails to protect all the components.
5R
5L
3. Hand start all three #8 screws, then tighten
completely with Allen wrench. Repeat for the
remaining legs.
8
Align Leg bracket
and frame holes
5R