Owner's Manual

Please enter your saw model, machine
number as well as the part numbers of
the guide bar, saw chain and chain
sprocket in the spaces provided on the
right
This will make re-ordering simpler.
The guide bar, saw chain and chain
sprocket are subject to normal wear and
tear.
The part numbers of the standard bar,
chain and sprocket are printed on the
right for your convenience.
When purchasing these parts, always
quote the saw model, the part numbers
and names of the parts.
For recommended STIHL reduced
kickback cutting attachments
see section "Specifications"
of this Owner's Manual.
:DUUDQW\FODLPVIROORZLQJUHSDLUV
FDQEHDFFHSWHGRQO\LIWKHUHSDLUKDV
EHHQSHUIRUPHGE\DQDXWKRUL]HG
67,+/6HUYLFH6KRSXVLQJRULJLQDO
67,+/VSDUHSDUWV
Original STIHL parts can be identified
by the STIHL part number,
the logo STIHL6
and the STIHL parts symbol 
The symbol may appear alone
on small parts.
* depending on market
Model
Machine number
Guide bar part number
Chain part number
Sprocket part number
2UGHULQJ6SDUH3DUWV 6WRULQJWKH0DFKLQH
For periods of about 3 months or longer:
•
Drain and clean the fuel tank in a
well ventilated area.
•
Run engine until carburetor is dry -
this helps prevent the carburetor
diaphragms sticking together.
•
Remove the saw chain and guide
bar, clean them and protect
with corrosion inhibiting oil.
•
Thoroughly clean the machine -
pay special attention to the
cylinder fins and air filter.
•
If you use a biological chain lubri-
cant (e.g. STIHL Bioplus), fill the
chain oil tank.
•
Store the machine in a dry and high
or locked location - out of the
reach of children and other
unauthorized persons.
 