Instruction Manual

Table Of Contents
0478-906-9911-A
20
English
6 Assembling the Ridger
6.1 Assembling the Ridger
Unscrew nut (1) and remove bolt (2).
Insert bracket (3) into the guide of ridger (4) so bores (5)
align.
Insert bolt (2).
Screw on nut (1) and tighten firmly.
Tighten screws (6).
Bracket (3) is secured.
7.1 Attaching the Ridger
WARNING
The tiller may tip over or move when attaching the ridger.
This may result in injury to people and damage to property.
Always work in pairs when attaching the ridger.
Stop the engine.
Place the tiller on a level surface.
Have a second person lift and hold tiller (1) so blade
spur (2) can be removed.
6 Assembling the Ridger 7 Attaching and Removing the Ridger