Instruction Manual

Table Of Contents
0478-906-9911-A
22
English
8 Working with the Ridger
Detach retaining pin (4) and remove pin (5).
The ridger (2) can be removed.
Insert blade spur (6) into adapter (7) from below so the
bores align.
Insert pin (5).
Push retaining pin (4) through the bore in pin (5).
The blade spur is secured.
8.1 Adjusting the Swivel Range
The swivel range of the ridger can be adjusted.
Stop the engine.
Place the tiller on a level surface.
Loosen lock nuts (1).
Screw in screws (2) by turning clockwise.
Tighten lock nuts (1) firmly.
The swivel range is decreased.
Loosen lock nuts (1).
Unscrew screws (2) by turning anti-clockwise.
Tighten lock nuts (1) firmly.
The swivel range is increased.
8 Working with the Ridger