User Instructions

35
DEFRNLITNOSVFIDAPLCSRU EN
0478 907 9930 A - EN
● Start the engine.
(See instruction manual of the ride-on
mower)
● If necessary, turn the light on.
(See instruction manual of the ride-on
mower)
● Raise the snow plough into the
transport position. (Ö 13.2)
● Drive the ride-on mower onto the area
to be cleared.
(See instruction manual of the ride-on
mower)
● Set the throttle lever to the MAX
position. The throttle lever must always
be in the MAX position while clearing
snow.
(See instruction manual of the ride-on
mower)
● Swivel the snow plough into the desired
position. (Ö 10.2)
● Lower the snow plough into the working
position. (Ö 13.3)
● With the clutch/brake pedal pressed
down, select first gear.
(See instruction manual of the ride-on
mower)
● Slowly release the clutch/brake pedal.
(See instruction manual of the ride-on
mower)
Braking (manual gearbox):
● Press the clutch/brake pedal down
evenly and hold. The ride-on mower
stops.
(See instruction manual of the ride-on
mower)
● Place the snow plough in the transport
position if necessary. (Ö 13.2)
13.6 Parking the ride-on mower with
snow plough
● Park the ride-on mower safely.
(See instruction manual of the ride-on
mower)
● Engage the parking brake.
(See instruction manual of the ride-on
mower)
● Lower the snow plough completely
(working position) (Ö 13.3)
14.1 General
The "Maintenance" section refers to the
snow plough only.
It is essential that these points are
observed prior to maintenance, repair
and cleaning work:
● Park the ride-on mower on level and
solid ground.
● Stop the engine (see instruction manual
of the ride-on mower).
● Lower the snow plough completely
(working position). (Ö 13.3)
● Remove the ignition key and keep in a
safe place (see instruction manual of
the ride-on mower).
● Engage the parking brake.
(See instruction manual of the ride-on
mower)
● Allow the engine to cool down.
● Remove the ignition key (see
instruction manual of the ride-on
mower).
● Carefully read and observe the section
"For your safety". (Ö 4.)
14.2 Maintenance schedule
The specified maintenance intervals must
be strictly observed.
Risk of injury!
For models with a manual gearbox,
snowploughing may only be
performed in first gear for safety
reasons.
Risk of injury!
For safety reasons, always lower
the snow plough completely when
storing the ride-on mower.
14. Maintenance
Risk of injury!
Read and observe the section "For
your safety" before all maintenance
and repair work. (Ö 4.)
Also carefully read and observe the
section "For your safety" in the
instruction manual of the ride-on
mower.
Remove the ignition key and keep
in a safe place before performing
any maintenance, repair or
cleaning operations (see instruction
manual of the ride-on mower).
Danger of burns!
Allow the machine (ride-on mower)
to cool down completely before
performing any maintenance
operations. Pay particular attention
to the area around the exhaust.
Note
Always lower the snow plough
completely before opening the
engine hood. (Ö 13.3)