User Instructions
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Gerätebeschreibung
- 4. Zu Ihrer Sicherheit
- 5. Symbolbeschreibung
- 6. Lieferumfang
- 7. Rahmenmontage
- 8. Schneeschild zusammenbauen
- 9. Montage und Demontage Schneeschild
- 10. Bedienelemente
- 11. Hinweise zum Arbeiten
- 12. Aufsitzmäher winterfit machen
- 13. Gerät in Betrieb nehmen
- 14. Wartung
- 15. Schneeschild einstellen
- 16. Transport
- 17. Übliche Ersatzteile
- 18. Zubehör
- 19. Umweltschutz
- 20. Erklärung für den Einbau einer unvollständigen Maschine
- 21. Technische Daten
- 22. Fehlersuche
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Frame installation
- 8. Assembling the snow plough
- 9. Installing and removing the snow plough
- 10. Controls
- 11. Notes on working with the machine
- 12. Preparing the ride-on mower for winter use
- 13. Operating the machine
- 14. Maintenance
- 15. Adjusting the snow plough
- 16. Transport
- 17. Standard spare parts
- 18. Accessories
- 19. Environmental protection
- 20. Declaration on the installation of an incomplete machine
- 21. Technical specifications
- 22. Troubleshooting
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Description de l’appareil
- 4. Consignes de sécurité
- 5. Signification des pictogrammes
- 6. Contenu de l’emballage
- 7. Montage du châssis
- 8. Assemblage de la lame neige
- 9. Montage et démontage de la lame neige
- 10. Éléments de commande
- 11. Conseils d’utilisation
- 12. Préparation du tracteur de pelouse à l’hivernage
- 13. Mise en service de l’appareil
- 14. Entretien
- 15. Réglage de la lame neige
- 16. Transport
- 17. Pièces de rechange courantes
- 18. Accessoires
- 19. Protection de l’environnement
- 20. Déclaration de montage d'une machine incomplète
- 21. Caractéristiques techniques
- 22. Recherche des pannes
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Beschrijving van het apparaat
- 4. Voor uw veiligheid
- 5. Toelichting van de symbolen
- 6. Leveringsomvang
- 7. Frame monteren
- 8. Sneeuwruimschild in elkaar zetten
- 9. Montage en demontage sneeuwruimschild
- 10. Bedieningselementen
- 11. Aanwijzingen voor werken
- 12. Zitmaaier winterklaar maken
- 13. Apparaat in gebruik nemen
- 14. Onderhoud
- 15. Sneeuwruimschild instellen
- 16. Transport
- 17. Standaard reserveonderdelen
- 18. Accessoires
- 19. Milieubescherming
- 20. Verklaring voor het inbouwen van een onvolledige machine
- 21. Technische gegevens
- 22. Defectopsporing
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Descrizione dell’apparecchio
- 4. Per la vostra sicurezza
- 5. Descrizione dei simboli
- 6. Equipaggiamento fornito
- 7. Montaggio del telaio
- 8. Assemblaggio dello scudo spazzaneve
- 9. Montaggio e smontaggio dello scudo spazzaneve
- 10. Elementi di comando
- 11. Istruzioni di lavoro
- 12. Predisposizione del trattorino da giardino all'uso in inverno
- 13. Messa in servizio dell'apparecchio
- 14. Manutenzione
- 15. Regolazione scudo spazzaneve
- 16. Trasporto
- 17. Ricambi standard
- 18. Accessori
- 19. Tutela dell’ambiente
- 20. Dichiarazione per il montaggio di una macchina incompleta
- 21. Dati tecnici
- 22. Risoluzione guasti
- 1. Innholdsfortegnelse
- 2. Om denne bruksanvisningen
- 3. Maskinbeskrivelse
- 4. For din egen sikkerhet
- 5. Symbolforklaring
- 6. Produktkomponenter
- 7. Rammemontering
- 8. Sette sammen snøskjæret
- 9. Montere og demontere snøskjæret
- 10. Betjeningselementer
- 11. Informasjon om arbeid
- 12. Gjøre plentraktoren klar for vinteren
- 13. Ta maskinen i bruk
- 14. Vedlikehold
- 15. Stille inn snøskjæret
- 16. Transport
- 17. Vanlige reservedeler
- 18. Tilbehør
- 19. Miljøvern
- 20. Erklæring for montering av en ufullstendig maskin
- 21. Tekniske data
- 22. Feilsøking
- 1. Innehållsförteckning
- 2. Information om denna bruksanvisning
- 3. Maskinbeskrivning
- 4. För din säkerhet
- 5. Symbolbeskrivning
- 6. Leveransens omfattning
- 7. Rammontering
- 8. Sätta ihop snöröjningsblad
- 9. Montera och demontera snöröjningsblad
- 10. Reglage
- 11. Arbetsanvisningar
- 12. Göra åkgräsklippare vinterklar
- 13. Ta maskinen i bruk
- 14. Underhåll
- 15. Ställa in snöröjningsblad
- 16. Transport
- 17. Vanliga reservdelar
- 18. Tillbehör
- 19. Miljöskydd
- 20. Förklaring för montering av en ofullständig maskin
- 21. Tekniska data
- 22. Felsökning
- 1. Sisällysluettelo
- 2. Tätä käyttöopasta koskevia tietoja
- 3. Laitekuvaus
- 4. Turvallisuutesi vuoksi
- 5. Kuvasymbolien selitykset
- 6. Toimitussisältö
- 7. Rungon asennus
- 8. Lumiauran kokoaminen
- 9. Lumiauran asennus ja irrotus
- 10. Hallintalaitteet
- 11. Työskentelyohjeita
- 12. Ajoleikkurin valmistelu talvikäyttöön
- 13. Laitteen käyttöönotto
- 14. Huolto
- 15. Lumiauran säätö
- 16. Kuljetus
- 17. Varaosat
- 18. Lisävarusteet
- 19. Ympäristönsuojelu
- 20. Puolivalmistekoneen asennusta koskeva vakuutus
- 21. Tekniset tiedot
- 22. Vianetsintä
- 1. Indholdsfortegnelse
- 2. Om denne betjeningsvejledning
- 3. Beskrivelse af maskinen
- 4. Sikkerhed
- 5. Symbolforklaring
- 6. Medfølgende dele
- 7. Rammemontering
- 8. Saml sneskærmen
- 9. Montering og demontering af sneskærmen
- 10. Betjeningsdele
- 11. Arbejdsanvisninger
- 12. Omstil havetraktoren til vinterbrug
- 13. Tag maskinen i brug
- 14. Vedligeholdelse
- 15. Juster sneskærmen
- 16. Transport
- 17. Standardreservedele
- 18. Tilbehør
- 19. Miljøbeskyttelse
- 20. Erklæring vedrørende montering af en ufuldstændig maskine
- 21. Tekniske data
- 22. Fejlsøgning
- 1. Spis treści
- 2. Uwagi dotyczące instrukcji obsługi
- 3. Opis urządzenia
- 4. Zasady bezpiecznej pracy
- 5. Objaśnienie symboli
- 6. Wyposażenie standardowe
- 7. Montaż ramy
- 8. Składanie odkładnicy do śniegu
- 9. Zamontowanie i zdemontowanie odkładnicy do śniegu
- 10. Elementy obsługi
- 11. Wskazówki dotyczące wykonywania pracy
- 12. Przygotowanie kosiarki samojezdnej do zimy
- 13. Uruchamianie urządzenia
- 14. Konserwacja
- 15. Regulacja odkładnicy do śniegu
- 16. Transport
- 17. Typowe części zamienne
- 18. Wyposażenie dodatkowe
- 19. Ochrona środowiska
- 20. Deklaracja dotycząca montażu maszyny nieukończonej
- 21. Dane techniczne
- 22. Wykrywanie usterek
- 1. Obsah
- 2. O tomto návodu k použití
- 3. Popis stroje
- 4. Pro vaši bezpečnost
- 5. Popis symbolů
- 6. Rozsah dodávky
- 7. Montáž rámu
- 8. Smontování sněhové radlice
- 9. Montáž a demontáž sněhové radlice
- 10. Ovládací prvky
- 11. Pokyny pro práci
- 12. Příprava zahradního traktoru na zimní provoz
- 13. Uvedení stroje do provozu
- 14. Údržba
- 15. Nastavte sněhovou radlici
- 16. Přeprava stroje
- 17. Běžné náhradní díly
- 18. Příslušenství
- 19. Ochrana životního prostředí
- 20. Prohlášení pro montáž nekompletního stroje
- 21. Technické údaje
- 22. Hledání závad
- 1. Содержание
- 2. О пользовании данной инструкцией по эксплуатации
- 3. Описание устройства
- 4. Техника безопасности
- 5. Описание символов
- 6. Комплект поставки
- 7. Монтаж рамы
- 8. Сборка снегоочистительного отвала
- 9. Монтаж и демонтаж снегоочистительного отвала
- 10. Элементы управления
- 11. Рекомендации по работе
- 12. Подготовка минитрактора-косилки к зиме
- 13. Введение устройства в работу
- 14. Техническое обслуживание
- 15. Регулировка положения снегоочистительного отвала
- 16. Транспортировка
- 17. Стандартные запчасти
- 18. Принадлежности
- 19. Охрана окружающей среды
- 20. Заявление о монтаже некомплектной машины
- 21. Технические данные
- 22. Поиск неисправностей
0478 907 9930 A - EN
36
Maintenance operations after the first 5
operating hours:
● Check that all bolted connections are
securely fastened.
Maintenance operations before each
use:
● Check the wear on both gauge wheels
and the slide bar.
Maintenance operations after each use:
● Clean the snow plough and ride-on
mower thoroughly and remove any salt.
Lubricate the snow plough if necessary.
(Ö 14.3)
14.3 Lubrication
It is recommended to lubricate all
moving parts as required with a
commercially available lubricating grease
spray (e.g. the lubricating grease spray
from Teroson).
If the snow plough is being stored for an
extended period, all moving parts must
first be lubricated with a commercially
available lubricating grease spray.
Removing the cover 1:
● Loosen and unscrew cap nuts (1).
● Loosen and unscrew nuts (2).
● Pull studs (3) out from the respective
bores in snow plough (4) and detach
springs (5).
● Loosen and unscrew both nuts (6).
Remove bolts (7) and nuts (6).
● Remove cover (8) upwards.
Lubricating the snow plough 2:
● Lubricate all lubrication points (A) on
both sides with a commercially
available lubricating grease spray.
Installing the cover 3:
● Fit cover (8).
● Insert both bolts (7) through the bores
from above and screw on nuts (6).
Tighten nuts (6) to 2-4 Nm.
● Attach springs (5) and insert studs (3)
through the respective bore in snow
plough (4).
● Screw on nuts (2) and tighten.
● Screw on cap nuts (1) and tighten.
● Check the coil spring setting. (Ö 15.2)
Lubricating the mounting frame 4:
● Lubricate all lubrication points (B) with a
commercially available lubricating
grease spray.
14.4 Reversing or replacing a
slide bar
Removing the slide bar:
● Place the snow plough in the transport
position.
● For safety, place a support (1) (e.g.
piece of wood) under both gauge
wheels (2) (right and left side of the
snow plough).
● Unscrew nuts (3) and bolts (4) and
remove slide bar (5).
Installing the slide bar:
● Reverse (worn edge upwards) or
replace slide bar (5).
● Insert slide bar (5) so that the lower
edge is parallel to the ground (note the
position of the chamfer).
● Insert bolts (4) through the bores in the
snow plough and slide bar (5). Screw
on nuts (3) and tighten to 25-35 Nm.
● Place the snow plough in the transport
position.
● Remove the support and lower the
snow plough into the working position.
(Ö 13.3)
14.5 Adjusting the thrust spring
Adjusting the spring:
● Set the correct height by turning the
screw.
Both thrust springs must be installed in
the same way.
Height: 22 mm
Danger of burns!
Allow the machine to cool down
completely before any lubrication
work. Pay particular attention to the
muffler and all surrounding parts
(except the model RT 4082).
17
Note:
Remove excess grease and
dispose of it in an environmentally-
friendly way.
Note
In order for the snow plough to
function optimally, the slide bar
must be adjusted correctly. Reverse
or replace a badly worn or
damaged slide bar.
18
Note
The thrust spring must be adjusted
in case of repair so that the snow
plough can be installed correctly.
16