Instruction Manual

BF-MM, BK-MM
English
9
Starting the Engine
Always follow the starting procedure
described in the MultiEngine instruction
manual.
N Secure the handlebar in the normal
operating position.
N Retract the wheels, if fitted – see
chapter on "Wheels" in MultiEngine
instruction manual.
N Retract the spur, if fitted.
N Check that the MultiTool is not
touching the ground or any other
obstacles. The unit must rest on the
engine flange and the support on
the frame.
N Make sure you have good balance
and secure footing – as shown in the
illustration.
WARNING
To reduce the risk of injury from contact
with the rotating attachment, always
stand to the side of the power tool, never
in front of the attachment.
N With your left hand on the loop
handle, press the unit firmly against
the ground – do not touch the
throttle trigger or lockout lever.
NOTICE
Do not stand or kneel on the handlebar
or frame.
WARNING
The attachment may begin to move as
soon as the engine starts. For this
reason, blip the throttle after starting –
the engine returns to idling speed.
Now follow the starting procedure
described in the MultiEngine instruction
manual.
Stopping the Engine
N See MultiEngine instruction manual.
For periods of about 3 months or longer
N Remove, clean and inspect the rotor
blades.
N Coat metal parts of interchangeable
attachment with corrosion inhibiting
oil.
N Store the machine in a dry and
secure location Keep out of the
reach of children and other
unauthorized persons.
Starting / Stopping the
Engine
469BA061 AS
469BA062 AS
Storing the Machine