Instruction Manual

BG 56, BG 56 C, BG 66, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
English
22
from the inside outwards under a jet
of water – do not use a pressure
washer.
N Dry the filter – do not expose to high
temperatures.
Place the filter in position.
N Install the filter element in the filter
housing.
N Fit the filter cover and tighten the
filter cover lock clockwise.
Exhaust emissions are controlled by the
design of the engine and components
(e.g. carburation, ignition, timing and
valve or port timing).
The carburetor has been set at the
factory to provide an optimum fuel-air
mixture under most operating
conditions.
Adjusting Idle Speed
Engine stops while idling
N Turn the idle speed screw (LA)
clockwise until the engine runs
smoothly.
Engine Management Adjusting the Carburetor
0000-GXX-7919-A0