Owner's Manual

BG 55, BG 65, BG 85, SH 55, SH 85
English
11
To minimize blowing time, use a rake
and broom to loosen dirt particles before
you start blowing.
Recommended working technique to
minimize air pollution:
N If conditions are very dusty, dampen
surfaces slightly before blowing.
N Pull out the nozzle to full length so
that the airstream is at ground level.
N Do not blow particles in the direction
of bystanders, in particular in the
direction of children, pets, open
windows or freshly washed
vehicles. Take special care in such
situations.
N Remove the blow-swept debris in
rubbish bins – do not blow it onto the
neighbor's land.
Recommended working technique to
minimize noise:
N Operate your power tool at
reasonable times only – not early in
the morning, late at night or during
midday rest periods when people
could be disturbed. Observe local
rest periods. Normal
recommendation for professional
use on weekdays: 9:00hrs to
12:00hrs and 15:00hrs to 17:00hrs.
Be considerate of neighbors at
weekends.
N Fewer engines mean less noise.
Where possible, do not run more
than one power tool at any time.
N Operate blowers at the lowest
engine speed necessary to
accomplish the task.
N Check your blower before starting
work. Pay special attention to the
muffler, air intakes and air filter.
Save water by using a blower instead of
a water hose for lawn and garden work
wherever possible, e.g. for cleaning
yards and patios.
Mounting the Blower Tube
N Push the blower tube (1) with lug (2)
into the fan housing stub (3) and
rotate it in the direction of the arrow
to lock in position.
Working Technique Assembling the Blower
3
2
295BA003 KN
1