Instruction Manual
Table Of Contents
- STIHL BG 56, 66, 86, SH 56, 86
- 1 Guide to Using this Manual
- 2 Safety Precautions and Working Techniques
- 2.1 Accessories and replacement parts
- 2.2 Physical fitness
- 2.3 Intended Use
- 2.4 Clothing and equipment
- 2.5 Transporting the machine
- 2.6 Refueling
- 2.7 Before starting
- 2.8 Starting the engine
- 2.9 While working
- 2.10 Using the blower
- 2.11 Using the Vacuum Attachment
- 2.12 Working Technique
- 2.13 Vibrations
- 2.14 Maintenance and Repairs
- 3 Assembling the Blower
- 4 Assembling the Vacuum Shredder
- 5 Fuel
- 6 Fueling
- 7 Starting / Stopping the Engine
- 8 Cleaning the Air Filter
- 9 Adjusting the Carburetor
- 10 Spark Plug
- 11 Engine Running Behavior
- 12 Storing the Machine
- 13 Inspections and Maintenance by Dealer
- 14 Maintenance and Care
- 15 Main Parts
- 16 Specifications
- 17 Maintenance and Repairs
- 18 Disposal
- 19 EC Declaration of Conformity
WARNING
After fueling, tighten down the filler cap as
securely as possible.
6.3 Changing the fuel pickup body
295BA065 KN
Change the fuel pick up body every year.
► Drain the fuel tank.
► Use a hook to pull the fuel pickup body out of
the tank and take it off the hose.
► Push the new pickup body into the hose.
► Place the pickup body in the tank.
7 Starting / Stopping the
Engine
7.1 Starting the Engine
► Observe safety precautions.
1
296BA009 KN
► Press the manual fuel pump bulb (1) at least
five times – even if the bulb is filled with fuel.
7.1.1 Adjusting the setting lever
Only on BG 66 C, BG 86, SH 86
295BA069 KN
► To start, move the setting lever to the run posi‐
tion F
296BA007 KN
3
The setting lever (2) allows the throttle trigger (3)
to be locked in any required position during oper‐
ation.
7.1.2 Adjusting the choke knob
If the engine is cold
295BA067 KN
►
Turn the choke knob to g
English 7 Starting / Stopping the Engine
12 0458-296-8321-F