Instruction Manual

If the engine is warm
295BA068 KN
►
Turn the choke knob to <
Also use this setting if the engine has been run‐
ning but is still cold.
7.1.3 Cranking
296BA006 KN
► Place the unit on the ground so that it is
secure.
► Make sure you have a firm footing: Hold the
unit firmly with your right hand on the housing
and press down.
► Hold the starter grip with your left hand.
Version with ErgoStart
► Pull the starter grip steadily.
Version without ErgoStart
► Pull the starter grip slowly until you feel it
engage and then give it a brisk strong pull.
NOTICE
Do not pull out the starter rope all the way – it
might otherwise break.
► Do not let the starter grip snap back. Guide it
slowly back into the housing so that the starter
rope can rewind properly.
7.2 As Soon as Engine Runs
296BA008 KN
3
296BA008 KN
► Blip the throttle trigger (3) – the choke knob
moves to the run position F – the engine
returns to idle speed.
7.3 Stopping the Engine
7.3.1 BG 56, BG 66, SH 56
295BA072 KN
► Move the stop switch to
0 – the engine stops
– the stop switch springs back to the on posi‐
tion.
7 Starting / Stopping the Engine English
0458-296-8321-F 13