Instruction Manual

Air throughput
Round blower
nozzle
flat film
extrusion
die
BG 56:
700 m
3
/h
- - -
BG 66:
630 m
3
/h
- - -
BG 86:
755 m
3
/h 620 m
3
/h
SH 56:
700 m
3
/h 560 m
3
/h
SH 86:
755 m
3
/h 620 m
3
/h
Maximum air speed (blower mode, round nozzle)
BG 56: 71 m/s
BG 66: 62 m/s
BG 86: 76 m/s
SH 56: 71 m/s
SH 86: 76 m/s
Maximum air flow rate without blower tube
assembly
BG 56:
730 m
3
/h
BG 66:
730 m
3
/h
BG 86:
810 m
3
/h
SH 56:
730 m
3
/h
SH 86:
810 m
3
/h
16.5 Weight
Dry, blower mode
BG 56:
4.1 - 4.2 kg
*)
BG 66: 4.4 kg
BG 66 C: 4.7 kg
BG 86:
4.4 - 4.5 kg
*)
Dry, vacuum mode
SH 56: 5.2 kg
SH 86: 5.6 kg
16.6 Noise and Vibration Data
For further details on compliance with Vibration
Directive 2002/44/EC see www.stihl.com/vib.
16.6.1 Sound pressure level L
peq
to
DIN EN 15503
Blower mode Vacuum
mode
BG 56: 90 dB(A) 94 dB(A)
BG 66: 86 dB(A) - - -
BG 86: 90 dB(A) 93 dB(A)
SH 56: 90 dB(A) 94 dB(A)
SH 86: 90 dB(A) 93 dB(A)
16.6.2 Sound power level L
w
to
DIN EN 15503
Blower mode Vacuum
mode
BG 56: 104 dB(A) 105 dB(A)
BG 66: 98 dB(A) - - -
BG 86: 104 dB(A) 106 dB(A)
Blower mode Vacuum
mode
SH 56: 104 dB(A) 105 dB(A)
SH 86: 104 dB(A) 106 dB(A)
16.6.3 Vibration measurement a
hv, eq
to
DIN EN 15503
Blower mode
Handle,
right
BG 56:
7.5 m/s
2
BG 66:
7.8 m/s
2
BG 66 C:
2.1 m/s
2
BG 86:
2.5 m/s
2
SH 56:
7.5 m/s
2
SH 86:
2.5 m/s
2
Vacuum mode
Handle, left Handle,
right
BG 56:
8.5 m/s
2
7.5 m/s
2
BG 86:
2.5 m/s
2
1.9 m/s
2
SH 56:
8.5 m/s
2
7.5 m/s
2
SH 86:
2.5 m/s
2
1.9 m/s
2
The K‑factor in accordance with Directive
2006/42/EC is 2.0 dB(A) for the sound pressure
level and sound power level; the K‑factor in
accordance with Directive 2006/42/EC is
2.0 m/s
2
for the vibration level.
16.7 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation (EC) No. 1907/2006 see
www.stihl.com/reach.
16.8 Exhaust Emissions
The CO
2
value measured in the EU type approval
procedure is specified at www.stihl.com/co2.
The measured CO
2
value was determined on a
representative engine in accordance with a
standardized test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this instruction manual. The
type approval expires if the engine is modified in
any way.
*)
depending on model
16 Specifications English
0458-296-8321-F 19