Instruction Manual

4 Assembling the Vacuum
Shredder
4.1 Mounting the Elbow
4
295BA058 KN
3
2
1
► Push the elbow (1) into the catcher bag (2) as
far as the mark (smaller arrow).
► Tighten strap (3) on catcher bag and press
down the tab (4).
NOTICE
Make sure the zipper on the catcher bag is
closed.
5
296BA021 KN
6
► Line up the arrows (5).
►
Position the union nut so that the symbol ‚ is
in line with the arrows.
► Push the elbow into the recess in the fan
housing stub (6) as far as stop.
8
296BA022 KN
► Push the union nut (7) over the fan housing
stub as far as stop.
► Rotate the union nut (7) in direction of arrow
until symbol ƒ is in line with the arrows –
union nut snaps audibly into position.
4.2 Assembling the Suction Tube
295BA080 KN
► Line up the arrows on the suction tube and
extension tube. Push together and lock in
position.
4.3 Mounting the Suction Tube
► Shut down the engine.
1
2
269BA030 KN
► Insert screwdriver in the tab (1) and press
down to disengage the intake screen (2) and
then open the intake screen.
4
3
296BA023 KN
► Line up the arrows (3).
► Position union nut (5) so that the opening lines
up with the arrows (3).
► Push the suction tube into the fan housing
stub (4) as far as stop.
► Push the union nut (5) over the fan housing
stub.
4 Assembling the Vacuum Shredder English
0458-296-8321-F 9