Owner's Manual

•
Line up the dots on the suction
tube  and fan housing intake  -
push tube into the housing.
•
Rotate tube clockwise to
engage bayonet coupling.
•
Line up the dots on the elbow 
and the fan housing stub  - push
the elbow onto the stub.
•
Tighten down the clamp .
•
Attach the carrying strap .
Vacuum attachment is now ready for
use.
&RQYHUWLQJEDFNWREORZHU
•
Remove elbow with catcher bag -
as described under "Preparations
for vacuuming" - and the suction
tube.
•
Allow spring action to close the
intake screen so that it snaps into
position.
•
Fit and secure the blower tube.
&RQQHFWLQJWRSRZHUVXSSO\
Observe safety precautions - see
chapter "Safety Precautions"
The voltage of your power supply and
the voltage specified on the unit must
be the same. For correct extension cord
see page 4.
•
Insert unit’s plug  in extension
cord coupling .
•
Swing the flap  outward and
push extension cord into the
recess.
•
Let go of the flap.
291BA005 KN
8
9
2
10
291BA006 KN
11
12
2SHUDWLQJ,QVWUXFWLRQV
1
291BA007 KN
2
3
 %*(