Instruction Manual

► Line up the arrows on the suction tube and
extension tube. Push together and lock in
position.
4.3 Mounting the Suction Tube
2
1
0000-GXX-2310-A1
► Switch off the motor.
► Press down the lock button (1) by inserting a
suitable tool through the opening.
► Push lug (arrow) against blower housing and
hold it there.
► Rotate the intake screen (2) in the direction of
arrow as far as the stop and lift it away.
290BA009 KN
► Line up the arrows (3).
► Push the suction tube into the intake opening
as far as the stop.
290BA018 KN
5
► Push the handle (4) over the intake opening.
► Line up the arrows (3 and 5).
► Rotate the handle (4) in direction of arrow until
the lever (6) engages audibly on the blower
housing.
0000-GXX-2556-A0
Lock button (arrow) must engage in position.
4.4 Removing the Elbow
2
1
0000-GXX-2557-A0
► Shut off the engine.
► Press down the lock button (1) by inserting a
suitable tool through the opening.
► Rotate the union nut (1) in the direction of
arrow as far as the stop.
► Remove the elbow (2).
4.5 Removing the Suction Tube
2
1
0000-GXX-2311-A0
► Shut off the engine.
► Press down the lock button (1) by inserting a
suitable tool through the opening.
► Depress lever (1) and rotate handle (2) in
direction of arrow as far as the stop.
► Remove the handle together with the suction
tube.
4 Assembling the Vacuum Shredder English
0458-290-0121-C 9