Instruction Manual

BR 200
English
13
Shut off the engine.
N Move the setting lever in the
direction of † – the engine stops –
the setting lever springs back to the
on position.
During Operation
After a long period of full throttle
operation, allow the engine to run for a
short while at idle speed so that engine
heat can be dissipated by the flow of
cooling air. This helps protect engine-
mounted components (ignition,
carburetor) from thermal overload.
After Finishing Work
Storing for a short period: Wait for the
engine to cool down. Keep the machine
in a dry place, well away from sources of
ignition, until you need it again. For
longer out-of-service periods – see
"Storing the Machine".
If there is a noticeable loss of engine
power
N Turn the filter cover lock (1)
counterclockwise to the vertical
position.
N Remove the filter cover (2).
N Clean away loose dirt from around
the filter.
N Pull off the adapter (3) and remove
the filter (4).
N Fit a new filter element. As a
temporary measure you can knock it
out on the palm of your hand or blow
it out with compressed air. Do not
wash.
Replace any damaged parts.
0009BA018 KN
Operating Instructions Cleaning the Air Filter
2431BA020 KN
1
2
3
4
9928BA011 AM