Instruction Manual

BR 200
English
14
Install the filter element.
N Fit the filter in the filter housing and
push the retainer into position.
N Refit the filter cover and turn the
filter cover lock to the horizontal
position
The carburetor has been set at the
factory to provide an optimum fuel-air
mixture under most operating
conditions.
Adjusting Idle Speed
Engine stops while idling
N Turn the idle speed screw (LA)
clockwise until the engine runs
smoothly.
Power tools with a catalytic converter
(depending on model) must be run on a
50 : 1 mixture of unleaded gasoline and
STIHL two-stroke engine oil or
equivalent two-stroke engine oil – see
chapter on "Fuel".
The catayltic converter integrated in the
muffler reduces the harmful emissions in
the exhaust gas.
The correct carburetor setting (if
adjustable) and strict observance of the
prescribed mix ratio of gasoline and two-
stroke engine oil are essential to
minimize harmful emissions and ensure
a long catalytic converter service life.
Adjusting the Carburetor
0000-GXX-7919-A0
Catalytic Converter