Instruction Manual

BR 200
English
21
Engine
Ignition System
Electronic magneto ignition
Fuel System
All position diaphragm carburetor with
integral fuel pump
Blowing Performance
Weight
Noise and Vibration Data
Noise and vibration data are measured
at idling and maximum rated speed in a
ratio of 1:6.
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib/
Sound pressure level L
peq
to
DIN EN 15503:2010
Sound power level L
weq
to
DIN EN 15503:2010
Vibration measurement a
hv,eq
to
DIN EN 15503:2010
The K
-
factor in accordance with
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
power level; the K
-
factor in accordance
with Directive 2006/42/EC is 2.0 m/s
2
for the vibration level.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
Exhaust Emissions
The CO
2
value measured in the EU type
approval procedure is specified at
www.stihl.com/co2.
The measured CO
2
value was
determined on a representative engine
in accordance with a standardized test
procedure under laboratory conditions
and does not represent either an explicit
or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission
requirements are fulfilled by the
intended usage and maintenance
described in this instruction manual. The
type approval expires if the engine is
modified in any way.
Specifications
STIHL single cylinder two-stroke engine
Displacement: 27.2 cc
Bore: 34 mm
Stroke: 30 mm
Idle speed: 2,500 rpm
Engine power to
ISO 7293: 0.8 kW (1.1 bhp)
Spark plug (resistor
type): NGK CMR 6 H
Electrode gap: 0.5 mm
Fuel tank capacity: 1050 cc (1.05 l)
Blowing force: 12 N
Air velocity: 56 m/s
Air flow rate: 680 m
3
/h
Maximum air velocity 67 m/s
Maximum air flow rate with
-
out blower tube assembly: 800 m
3
/h
dry: 5.8 kg
96 dB(A)
103 dB(A)
Handle: 3.0 m/s
2