Owner's Manual

15BR 340, BR 380
English / USA
Change the fuel pick up body
every year.
Before storing your machine for a long
period, drain and clean the fuel tank and
run engine until carburetor is dry.
With the engine stopped and before
starting, check the air intakes
between the backplate and
powerhead for blockages and clean
if necessary.
A protective screen is available as a
special accessory to keep the air
intakes clear.
Always move the setting lever to the idle
position before shutting off the engine
because the throttle cable will otherwise
disconnect itself from the throttle trigger.
The throttle cable reconnects itself
automatically when the setting lever is
moved to the idle position.
Setting lever in idle position.
: Observe safety precautions – see
chapter “Safety Precautions and
Working Techniques”.
: Slide the stop switch (1) to #
: Move the setting lever (2) to the
center position – this is the
starting throttle position
Note:
The setting lever can be used to select
any throttle opening between idle speed
(lower stop) and full throttle (upper stop).
Set the lever to idle position before
switching off the engine.
373BA007 KN
Information
Before You Start
373BA037 KN
Starting / Stopping
the Engine
373BA008 KN
1
373BA009 KN
2