Owner's Manual

If the engine is down on power, check
the spark arresting screen in the muffler.

:DUQLQJ
Wait until engine has cooled down
completely before performing the
following operations.
•
Take out starter cover mounting
screws .
•
Remove the starter cover .
•
Pull off the spark plug boot .
•
Take out the housing mounting
screws .
•
Remove the housing .
•
Squeeze the ends of the clip 
together and lift the clip away.
•
Take the spark arresting screw 
out of the muffler.
•
Clean the spark arresting screen.
•
If screen is damaged or heavily
carbonized, fit a new one.
•
Install the spark arresting screen .
•
Fit the clip .
•
Place housing  in position.
•
Tighten down housing screws.
•
Fit the spark plug boot .
•
Fit the starter cover .
•
Tighten down the starter cover
screws .
353BA026
7 6
353BA025
5
1
1
1
4
4
4
4
3
2
6SDUN$UUHVWLQJ6FUHHQLQ0XIIOHU
353BA025
5
1
1
1
4
4
4
4
3
2
%5 