Owner's Manual

BR 350, BR 430
English
10
The combination wrench and
screwdriver are in the supplied
accessory bag.
BR 350 Blower Tube
Fitting the pleated hose on the elbow
N Ease the slip ring (2) apart and push
it over the elbow (1).
N Open the hose clamp (3) and fit it on
the pleated hose (4).
N Close the hose clamp (3) – engage
tab in recess.
N Push the pleated hose (4) over the
slip ring (2) as far as stop.
N Position the hose clamp (3) as
shown in the illustration.
N Tighten down the screw (arrow).
Mounting the blower tubes and
nozzle
N Assemble the blower tubes (5) and
nozzle (6).
Mounting the control handle
N Pull the ends of the clamp on the
control handle (7) apart and push it
over stub of pleated hose (4).
N Attach throttle cable to retainer on
the hose clamp (3).
Adjusting the control handle
N Put the machine on your back and
adjust the harness – see "Fitting the
Harness".
N Push the blower tube (5) into the
stub of pleated hose (4) as far as
the stop.
N Move the control handle (7) along
the tube to the most comfortable
position.
N Tighten down the screw in the
control handle (7).
Assembling the Unit
0009BA002 KN
1
2
0009BA003 KN
3
4
2
3
0009BA004 KN
4
0009BA027 KN
0009BA005 KN
6
5
5
3
0009BA006 KN
7
0009BA007 KN
5
7