Owner's Manual

BR 350, BR 430
English
11
BR 430 Blower Tube
Mounting the control handle
N Pull the two halves of the clamp
apart.
N Push the control handle (1) onto the
blower tube (2).
N Line up the control handle (1) with
the tube's seam – as shown.
N Secure the control handle (1) with
the screw (3) so that it can still be
moved on the blower tube (2).
Mounting the blower tubes
N Depending on your size and reach:
Push blower tube (1) up to the
appropriate mark on the blower
tube (2).
N Rotate the blower tube (1) in the
direction of the arrow and engage it
in the appropriate slot (3).
Mounting the hose clamps and
pleated hose
N Push the hose clamp (1) (with
retainer for throttle cable) onto the
elbow (3) – the positioning marks
must face to the left.
N Push the pleated hose (2) over the
elbow (3).
N Push the hose clamp (1) onto the
pleated hose (2).
N Line up the positioning marks on the
hose clamp (1) and elbow (3) – the
screw recess facing down.
N Secure the hose clamp (1) with the
screw (4).
N Push the hose clamp (5) (without
retainer for throttle cable) onto the
elbow (6) – the positioning marks
must face to the right.
N Push the blower tube (6) into the
pleated hose (2).
452BA101 KN
1
2
3
452BA102 KN
1
2
452BA096 KN
1
2
3
2
1
452BA108 KN
3
452BA109 KN
2
1
4
3
2
452BA103 KN
5
6