Owner's Manual

BR 350, BR 430
English
13
N Secure the velcro strip to the blower
tube – pull the flap through the
buckle.
N Secure the blower tube to the
handle on the backplate.
It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
N Set throttle trigger to the full throttle
position – as far as stop.
N Carefully rotate the screw in the
throttle trigger in the direction of the
arrow until you feel initial resistance.
Then rotate it another full turn.
Adjusting the Harness
N Pull the ends of the straps
downwards to tighten the harness.
Loosening the Harness
N Lift the tabs of the sliding adjusters.
N Adjust the harness so that the
backplate fits snugly and securely
against your back.
Adjusting the Throttle
Cable
0009BA008 KN
Fitting the Harness
373BA003 KN
373BA004 KN