Instruction Manual

BR 450, BR 450 C
English
8
N Push the hose clamp (5) (without
retainer for throttle cable) onto the
blower tube (6) – the positioning
marks must face to the right.
N Push the blower tube (6) into the
pleated hose (2).
N Push the hose clamp (5) onto the
pleated hose (2).
N Line up the hose clamp (5) and
blower tube (6) – as shown.
N Secure the hose clamp (5) with the
screw (7).
Mounting the Control Handle
N Push the control handle (1) onto the
mount (2) .
N Insert and tighten down the
screws (3) firmly.
N Engage the throttle cable (4) with
sleeve (5) in the hose clamp (6).
Adjusting the Control Handle
N Open the clamping lever (3).
N Move the control handle (1) along
the blower tube (2) to the most
comfortable position.
N Close the clamping lever (3).
Mounting the Nozzle (BR 700)
N Push the nozzle (1) onto the blower
tube (2) and engage it on the
lugs (3).
0416BA003 KN
5
6
2
5
6
2
0416BA004 KN
7
1
3
2
0000-GXX-2045-A1
4
6
5
0416BA008 KN
0416BA007 A1
1
2
3
3
0416BA005 KN
1
2