Instruction Manual

BR 450, BR 450 C
English
9
Removing the nozzle (BR 700)
N Rotate the nozzle (1) in the direction
of the arrow until the lugs (3) are
covered.
N Pull the nozzle (1) off the blower
tube (2).
Mounting the Nozzle (BR 700 X)
N Push the nozzle (1) onto the blower
tube (2) and engage it on the
lugs (3).
N Rotate the nozzle (1) in the direction
of arrow as far as the stop.
Removing the nozzle (BR 700 X)
N Rotate the nozzle (1) in the direction
of arrow as far as the stop.
N Pull the nozzle (1) off the blower
tube (2).
Adjusting the Blower Tube (BR 700)
N Loosen the union nut (1).
N Pull the blower tube (2) out to the
required length.
N Tighten the union nut (1).
Wear Mark on Nozzle
The front end of the nozzle wears away
due to abrasive ground contact during
operation. The nozzle is subject to
normal wear and tear and must be
replaced when the wear mark is
reached.
Transport Aid
When storing or transporting the
machine:
N Secure the blower tube to the
handle on the backplate with the
hook and loop fastener.
1
3
0416BA006 KN
2
3
1
2
0000-GXX-3989-A0
1
2
0000-GXX-3990-A0
1
0416BA015 KN
2
0416BA009 KN