Owner's Manual

BR 500, BR 550, BR 600
English
11
Mounting the Control Handle
N Pull the two halves of the clamp
apart.
N Push the control handle (1) onto the
blower tube (2).
N Line up the control handle (1) with
the tube's seam – as shown.
N Secure the control handle (1) with
the screw (3) so that it can still be
moved on the blower tube (2).
Mounting the Blower Tubes
BR 500
N Depending on your size and reach:
Push blower tube (1) up to the
appropriate mark on the blower
tube (2).
N Rotate the blower tube (1) in the
direction of the arrow and engage it
in the appropriate slot (3).
BR 550, BR 600
N Depending on your size and reach:
Push blower tube (1) up to the
appropriate mark on the blower
tube (2).
N Rotate the blower tube (1) in the
direction of the arrow and engage it
in the appropriate slot (3).
Mounting the Hose Clamps and
Pleated Hose
N Push the hose clamp (1) (with
retainer for throttle cable) onto the
elbow (3) – the positioning marks
must face to the left.
N Push the pleated hose (2) over the
elbow (3).
N Push the hose clamp (1) onto the
pleated hose (2).
N Line up the positioning marks on the
hose clamp (1) and elbow (3) – the
screw eye faces down.
N Secure the hose clamp (1) with the
screw (4).
Assembling the Unit
452BA101 KN
1
2
3
452BA102 KN
1
2
452BA095 KN
1
2
3
452BA096 KN
1
2
3
2
1
452BA108 KN
3
452BA109 KN
2
1
4
3