Instruction Manual

BR 500, BR 550, BR 600
English
14
Adjusting the Control Handle
N Move the control handle (1) along
the blower tube (2) to the most
comfortable position.
N Secure the control handle (1) with
the screw (3).
N Engage the throttle cable (4)
with sleeve (5) in the retainer (6).
Wear Mark on Nozzle
The front end of the nozzle is worn by
ground contact during operation.
Replace the nozzle when it has worn as
far as the wear mark.
Fitting the Transport Aid
When storing or transporting the
machine:
N Secure the velcro strip to the blower
tube – pull the flap through the
buckle.
N Secure the blower tube to the
handle on the backplate.
3
452BA110 KN
1
2
452BA100 KN