Instruction Manual

BR 500, BR 550, BR 600
English
15
It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
N Set throttle trigger to the full throttle
position – as far as stop.
N Carefully screw home the screw in
the throttle trigger until you feel
initial resistance.
N Adjust the harness straps so that
the backplate fits snugly and
securely against your back.
A Adjust height
B Adjust angle
Tightening the harness straps
N Pull the ends of the straps
downward.
Loosening the harness straps
N Lift the tabs of the sliding adjusters.
Adjusting the Throttle Cable Fitting the Harness
373BA003 KN
373BA004 KN