Instruction Manual

BR 800
English
15
Cranking
N Place the machine securely on the
ground – make sure that bystanders
are well clear of the nozzle outlet
and
N take the blower tube off the hook on
the blower housing (transport
position).
N Make sure you have a firm footing:
Hold the machine with your left hand
on the housing and put one foot
against the base plate to prevent it
slipping.
N Pull the starter grip steadily and
quickly with your right hand. Do not
pull out the starter rope to full length
– it might otherwise break.
N Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
N Continue cranking until the engine
fires.
When Engine Begins to Fire
If the engine is cold:
N Turn the choke knob to o and
continue cranking until the engine
runs.
If the engine is warm:
N Continue cranking until the engine
runs.
As Soon As the Engine Runs
N Blip the throttle trigger (2) – the
choke knob automatically returns to
F
or
N Turn the choke knob to F.
The engine settles down to idling speed.
At very low outside temperatures
N Allow engine to run in the cold start
position c until it almost stalls.
N If the engine stalls in the cold start
position c, turn the choke knob to
o and restart the engine.
Stopping the Engine
N Push the setting lever in the
direction of † – the engine stops –
the setting lever then springs back
automatically.
After Short Work Breaks
If the blower was running and the engine
shut down, it can be restarted on your
back after short work breaks.
0000-GXX-5394-A0
0000-GXX-5392-A0
2
0416BA012 KN
0416BA016 KN