Instruction Manual

BR 800
English
16
N Machine is on your back – make
sure that bystanders are well clear
of the nozzle outlet.
N Make sure you have a safe and
secure footing.
N Hold blower tube with your right
hand on the control handle.
N Pull the starter grip steadily and
quickly with your left hand. Do not
pull out the starter rope to full length
it might otherwise break.
N Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
N Continue cranking until the engine
runs.
If Engine Does Not Start
Choke Knob
If you did not turn the choke knob to o
quickly enough after the engine began to
fire, the combustion chamber is flooded.
N Push the setting lever (1) upwards.
The throttle trigger (2) is in the full
throttle position.
N Continue cranking until the engine
runs.
Other Hints on Starting
If the engine does not start
N Check that all settings are correct.
N Check that there is fuel in the tank
and refuel if necessary.
N Check that the spark plug boot is
properly connected.
N Repeat the starting procedure.
N Check adjustment of throttle cable
see chapter on "Adjusting the
Throttle Cable".
Engine stalls in cold start position c or
under acceleration
N Turn the choke knob to o and
continue cranking until the engine
runs.
Engine does not start in warm start
position o
N Move the choke knob to c and
continue cranking until the engine
runs.
Fuel tank run until completely dry
N After refueling, depress the manual
fuel pump bulb at least 6 times –
even if the bulb is already filled with
fuel.
N Set the choke knob according to
engine temperature.
N Start the engine.
0000-GXX-5395-A0
0416BA013 KN
2
1