Operation Manual

BR 350, BR 430
English
11
N Push the pleated hose (4) over the
slip ring (2) as far as stop.
N Position the hose clamp (3) as
shown in the illustration.
N Tighten down the screw (arrow).
Mounting the blower tubes and nozzle
N Assemble the blower tubes (5) and
nozzle (6).
Mounting the control handle
N Pull the ends of the clamp on the
control handle (7) apart and push it
over stub of pleated hose (4).
N Attach throttle cable to retainer on
the hose clamp (3).
Adjusting the control handle
N Put the machine on your back and
adjust the harness – see "Fitting the
Harness".
N Push the blower tube (5) into the
stub of pleated hose (4) as far as
the stop.
N Move the control handle (7) along
the tube to the most comfortable
position.
N Tighten down the screw in the
control handle (7).
BR 430 Blower Tube
Mounting the control handle
N Pull the two halves of the clamp
apart.
N Push the control handle (1) onto the
blower tube (2).
N Line up the control handle (1) with
the tube's seam – as shown.
N Secure the control handle (1) with
the screw (3) so that it can still be
moved on the blower tube (2).
3
0000-GXX-2039-A0
2
4
0000-GXX-2040-A0
0009BA005 KN
6
5
5
3
0009BA006 KN
7
0009BA007 KN
5
7
452BA101 KN
1
2
3
452BA102 KN
1
2