Operation Manual

BR 350, BR 430
English
13
Removing the nozzle
N Rotate the nozzle (1) in the direction
of the arrow until the lugs (3) are
covered.
N Pull the nozzle (1) off the blower
tube (2).
Adjusting the control handle
N Put the machine on your back and
adjust the harness – see "Fitting the
Harness".
N Move the control handle (1) along
the blower tube (2) to the most
comfortable position.
N Secure the control handle (1) with
the screw (3).
N Engage the throttle cable (4) with
sleeve (5) in the retainer (6).
Wear mark on nozzle
The front end of the nozzle wears away
due to abrasive ground contact during
operation. The nozzle is subject to
normal wear and tear and must be
replaced when the wear mark is
reached.
Fitting the transport aid
When storing or transporting the
machine:
N Secure the hook and loop fastener
to the blower tube – pull the flap
through the buckle.
N Secure the blower tube to the
handle on the backplate.
3
1
2
452BA112 KN
3
452BA110 KN
1
2
452BA100 KN