Operation Manual

15BR 45
english / USA
Before fueling, clean the filler cap and
the area around it to ensure that no dirt
falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
In order to reduce the risk of burns
or other personal injury from
escaping gas vapor and fumes,
remove the fuel filler cap carefully
so as to allow any pressure build-up
in the tank to release slowly.
After fueling, tighten fuel cap
as securely as possible by hand.
Change the fuel pick up body
every year.
Before storing your machine for a long
period, drain and clean the fuel tank and
run engine until carburetor is dry.
Observe safety precautions – see
chapter “Safety Precautions”.
: Slide the stop switch (1) to #
: Move the setting lever (2) to the
center position – this is the
starting throttle position.
The setting lever enables you select and
hold any throttle position between idle
(lower stop) and full throttle (upper stop).
Fueling
373BA030 KN
373BA007 KN
Starting / Stopping
the Engine
373BA008 KN
1
373BA009 KN
2